AccuTouch® 3000U USB Controller (Discontinued December 2006)

Merkmale

• Technische

  ---

  Artikelnummer(n)

  608244-000

  Technologie

  AccuTouch® 5-Draht-Widerstandssensorik

  Anzahl der Berührungspunkte

  Einfache Bedienung

  Eingabemethoden

  Finger
  Behandelt
  Passiver Schreibkopf

  Abmessungen

  2.28" x 3.50" x 0.65" / 57.9 mm x 88.9 mm x 16.5 mm

  Schnittstelle

  USB High Speed
  Plug and play compatible

  Oberflächenbehandlung

  Klar

  Auflösung

  Approximately 4096x4096, 12 bit resolution

  Conversion Time

  Approximately 8.6 ms per coordinate set

  Stromversorgung

  +5 VDC, nominal (+4.35 to +5.25 VDC)
  50 mA, typical at +5 VDC. Average power dissipation is 0.25 W, typical
  Power is obtained from 5V supply on the USB connector. No external power supply is needed.
  Total noise and ripple requirement must be less th

  Eingangsspannung

  +5 VDC, nominal (+4.35 to +5.25 VDC)

  Leistungsaufnahme

  Power is obtained from 5V supply on the USB connector

  Reliability

  MTBF greater than 250,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for the ground benign environment with an ambient temperature of 25°C

  Construction

  Four-layer surface-mount design with internal ground plane for EMI suppression

  Flammability

  The printed circuit board substrate is rated 94V0.
  All plastic components, such as headers and connectors, are also rated 94V0.
  In addition, circuitry is protected by Raychem Polyswitches, which are UL recognized components.
  

  Shock and Vibration

  ISTA 2A standard for shock
  Three axis sine wave, 50Hz to 2kHz, 1G, 2 minutes/Octave with dwell on resonance
  

  ESD

  Per EN 6100-4-2 1995: Level 4. Contact discharge 8kV, air discharge 15kV for USB and screen connector

  Betriebstemperatur

  0°C to 65°C

  Betriebsumgebung

  AccuTouch SmartSet protocol
  Initial/Stream/ Untouch/ Z-axis Enable Modes
  

  Lagertemperatur

  -25°C to 85°C

  Feuchtigkeit

  Operating: 10% to 90% RH, noncondensing
  Storage: 10% to 90% RH, noncondensing

  Höhe

  10,000 ft maximum

  MTBF

  50.000 Stunden, nachgewiesen

  Montageoptionen

  All mounting holes are plated through-holes for chassis ground connection.

  Connectors and Pin Definitions

  The connector configuration permits the controller to be placed in-line between the touchscreen and a USB hub or host attachment.

  Controllerkabelen

  Contact Elo for more information.